Designed for use with CalDigit certified devices, the CalDigit SuperSpeed PCI Express Card is the first to offer USB 3.0 connectivity to both Mac and PCs with an available PCIe slot. For the first time, Mac users can utilize USB 3.0 due to a special driver that has been developed by CalDigit.
Apple's new Mac Pro has some Mac users buzzing: the tiny machine appears to be crazy fast, and it's a total redesign of the system - replacing the giant aluminum box of yore with a tiny little black cylinder. But should you replace your Mac Pro with the new one? If you want to get as much bang for your buck, upgrade your aluminum Mac Pro with an Solid State Drive (SSD).
There are different options available for Mac Pro-compatible SSDs, and we're going to look at two of them here: a SATA-based SSD and a PCIe-based SSD. The bottom line is that you're going to see a huge increase in speed either way; it's just a question of what your budget will allow.
To give you some sense of how significant the difference in speed is, I've borrowed a couple of different products from Other World Computing (OWC). One is a SATA-based SSD - the Mercury Extreme 6G, the other is closer to what the new Mac Pro has - it's a PCIe card with SSDs on it, OWC's Mercury Accelsior_E2. Both the SATA SSD and the PCIe card have 240 gigabyte capacities, which were pretty comparable to the original 320GB 3.5-inch hard drive that came with this Mac Pro. All of them are running fresh copies of Mountain Lion 10.8.4, with up to date security patches.
Making the most of what you have
![Pcie Usb Card For Mac Pro Pcie Usb Card For Mac Pro](/uploads/1/2/5/8/125878131/886648893.jpg)
Obviously the older Mac Pro won't be as fast as the new one, but don't think that your aluminum monolith is completely useless. SSDs have come down in price quite a bit, and if you shop around it's now possible to pick one up (albeit with limited storage capacity) for under $100.
While SSDs cost a lot more per gigabyte than hard disk drives, the difference in speed is amazing. Your Mac Pro will be faster to boot, it will launch applications faster, and it will read and write data faster. How much faster? That depends on which option you choose: SATA or PCI Express (PCIe).
SATA
Serial ATA, or SATA, is the backbone of the aluminum Mac Pro's local data storage interface. Inside your Mac Pro are four SATA bays, each of which can accommodate a 3.5-inch hard disk drive. SATA is also used to connect the internal optical drive (or drives) your Mac Pro comes with.
What makes the SATA bays particularly easy to work with is the Mac Pro's 'sled' design - each drive mechanism is mounted on a tray that easily slides out and slides back in, locking the drive into place without needing to manually connect any ribbon cables. It's quick, it's easy and it's trademark Apple elegant, even within the brutalist architecture of the Mac Pro.
The various Mac Pros that have come out over the years differ in speed, interfaces and basic construction, but they all share common features. The internal drive bays are one of those features that's remained a constant through the Mac Pro's evolution, so regardless of which model of Mac Pro you use, it's going to be pretty similar.
Apple's made it very easy to get access to those drive bays, and to put in (and remove) drives. To get inside your Mac Pro, you just lift a lever on the back of the box, then slide out the side panel.
The only tool you'll need is a Philips head screwdriver. The screwdriver is used to actually mate the drive to the tray to hold it in place. But you don't need your own screws - they're built into the sled. The screws match up with mounting holes that are already pre-drilled onto all 3.5-inch hard disk mechanisms.
SATA SSDs are, by and large, designed with a 2.5-inch hard drive in mind, because that's what's used in most laptops - and laptops are very popular. Mounting a 2.5-inch SSD into a 3.5-inch hard drive sled isn't tricky - you just need a simple drive adapter to get the job done. OWC also offers a replacement drive sled that does the job, if you're using a 2009-era or later Mac Pro.
Once you've got the drive in, it's a simple matter of booting up the Mac and running Disk Utility in the Utilities folder. Create a partition map to your liking just like you would a hard drive and you're in business. Easy peasy.
PCIe
SATA is terrific because it's easy to work with and it's ubiquitous, so there are a lot of products - both hard drives and SSDs - designed to use it. But it has its limitations. One of them is its bandwidth. The SATA interface on the Mac Pro has a top transfer speed of 3 gigabits per second.
But there's another option if you're interested in maximum performance: go straight to PCI Express (PCIe). PCIe is the expansion card interface on the Mac Pro, the one you use for graphics cards and whatever other expansion cards you want to install. And there's a lot more bandwidth to work with - 10 gigabits per second.
By going PCIe, you're going to more closely align your Mac Pro with Apple's new black, cylindrical Mac Pro. It uses the same connection, eschewing SATA for a direct PCIe link. The same goes for the new Haswell-equipped MacBook Airs that shipped earlier this year.
Installing a PCIe card in the Mac Pro is, in some ways, easier even than a SATA drive. Once you've powered the Mac Pro down and have the side panel off, you simply unscrew a retaining plate near the back of the Mac Pro. Once it's out you can install the new card. You don't need any tools - the retaining bolt's screws can be finger-tightened (and untightened). Once installed and once the Mac is powered, you simply run Disk Utility, and you should see a fresh drive ready for formatting.
One nice thing about the Accelsior E2 and other PCIe-based cards - most of them have removable SSDs on them. Which means that over time, if you need more space, you should be able to simply buy larger SSDs and replace them without having to replace the card all together.
There are a few caveats, depending on the age of your Mac Pro. Early Mac Pros (models built in 2006 and 2007) sport PCIe 1.0 slots that don't perform as fast as later models, so you will be bandwidth-limited on those machines. 2008 models and beyond, like my eight-core Mac Pro, have faster PCIe 2.0 slots. The 2008 model has two 16x slots, and one is occupied by the stock video card. If you're only using one video card, you can use the other for the SSD and see maximum throughput. In any of the other 4x slots you're going to see slower performance. 2009 and newer Mac Pros will see the best performance out of any available slot.
Fast as hell
So what are the benefits of using an SSD? Let's take a look. For comparison's sake, I've run some tests using digital video hardware maker Blackmagic Design's free Disk Speed Test app, available for download from the Mac App Store. This will give you an idea of the devices' raw throughput.
First up is as close to bone stock as I can get: My 2008 Mac Pro with its factory-original 320GB Seagate hard disk drive, recently reformatted and running a fresh copy of Mountain Lion 10.8.4 with all the latest patches installed.
The drive registers about 101.3 megabytes per second write speed and about 94.4 megabytes read speed using Disk Speed Test. There were brief, sustained periods of faster write speed, but that's about where it settled - having said that, I expected better. Maybe it's because it's a five year old drive that's sat idle for a couple of years. Regardless, it's nowhere near the ceiling of a SATA interface, which is closer to 384 megabytes per second.
Next up is the Mercury Extreme 6G, OWC's fastest 2.5-inch SATA SSD.
As you can see, performance has more than doubled. Sustained writes clock in at 241.4 MB/sec, while sustained reads are even faster at 266.6 MB/sec. Again, this doesn't hit the ceiling of SATA bandwidth, but it comes much closer.
Last, but not least, is the PCIe-based Accelsior E2:
This thing smokes any other comers. Write speeds blast at about 332.8 MB/sec while read speeds peg the redline of the graphical needle on measurement tool, coming in at 630.9 MB/sec. Astonishing.
You get what you pay for
The performance difference between the average stock hard drive and any SSD is going to be distinct, so don't get too caught up in performance comparisons. You can spend a lot of money getting absolutely the fastest SSD you can afford, but whether it will be worth it is dependent on the age of your machine and its capabilities, as well as what you intend to do with it.
The real showstopper for most of us is price and capacity. For what you'll pay for a 128 gigabyte SSD, you can easily get a two terabyte hard disk drive. (That'd be 24 times the capacity of the 128 GB SSD). PCIe SSD is an even pricier and more specialized option. As a practical example: As I posted this article, you can buy a 2TB Seagate Barracuda hard drive for under $100 from Amazon.com. A 128GB SATA SSD from OWC costs $127.99. A 120GB PCIe SSD from OWC is priced at $329.99. Other manufacturer's prices will vary dramatically, but you get the point: the faster the storage system is, the more you pay.
That means you're not going to replace hard drives with SSD as a primary storage system any time soon. The price has to fall much further and chip density has to improve before there can be anything close to parity.
Best of both worlds
For now, SSDs are most economical and effective when they're used in conjunction with conventional hard drives, much as Apple has done with 'Fusion' drives on newer Mac models. You get the capacity of a regular hard disk with some of the benefits of an SSD.
It is possible to 'roll your own' Fusion-style device, though it requires using the Terminal and a command line interface. But even before you get to that, you can use your SSD as a regular boot volume. Use it to store a few critical applications and maybe a modest folder of frequently accessed documents, but continue to use SATA-based hard disk drives for everything else: a massive iTunes library, for example, or the apps and utilities that you want on hand but don't use every day.
For an added boost of performance, you can configure multiple drive mechanisms in a RAID - an array that you create using Apple's Disk Utility. You can also see a significant performance increases by 'striping' data across multiple drive mechanisms. Combine that with a fast SSD boot volume and you'll be amazed at how much fresher your Mac Pro feels.
The aluminum Mac Pro isn't perfect - it's big, it sucks up a lot of juice and it's been outclassed by Macs with newer features like USB 3.0 and Thunderbolt. But that doesn't mean the Mac Pro is entirely useless, either. It still crunches data hellaciously fast and it's built to last.
Putting in an SSD offers your Mac Pro a new lease on life with a dramatic improvement in performance that will be an eye opener. Consider the pros and cons and decide what your wallet will bear. But in the end, it may turn out that putting in an SSD is the best thing you've done to give your Mac Pro a bit more time before replacing it altogether.
We may earn a commission for purchases using our links. Learn more.
Rene Ritchie's gadget of the decade: Apple Watch
In my Apple Watch Series 5 review, I said that the addition of always-on took it from being the best smartwatch in the world to being the best damn watch period. And, three months later, I stand by that. Absolutely. 100 percent. But, it's also something more: Not just the best watch of the year, but the best gadget of the decade.
– For Intel-based Mac with open PCI Express 2.0 or 1.0 slot
– Two 6Gb/s eSATA & two 5Gb/s USB 3.0 ports for the fastest Mac Pro data interface
– PCIe 2.0x1 backwards compatible with PCIe 1.0
– Compatible with eSATA & USB 3.0 port equipped external solutions and drives
– Two 6Gb/s eSATA & two 5Gb/s USB 3.0 ports for the fastest Mac Pro data interface
– PCIe 2.0x1 backwards compatible with PCIe 1.0
– Compatible with eSATA & USB 3.0 port equipped external solutions and drives
MaximumPlug and Play Ease
eSATA interface
Mac and PC compatible
3 Year NewerTechMac and PC compatible
Product Limited Warranty
For Intel-based Macintosh Computers with an open PCI Express 2.0 or 1.0 expansion slot. The easiest solution for adding two SATA 6Gb/s ports and two USB 3.0 Ports to Mac Pros!
The MAXPower eSATA/USB3 Host Bus Controller (HBA) brings together the power of USB 3.0 and 6G SATA high-speed interfaces on a single PCIe 2.0 card. This highly integrated I/O card saves valuable PCIe slots and adds phenomenal throughput perfect for high-bandwidth demanding applications like video production, audio and photography.With two eSATA ports compatible with the latest 6G technology, The MAXPower eSATA/USB3 HBA supports lighting fast SSDs, as well as legacy SATA devices, SATA hubs, external optical drives and more. Support for “hot-plugging” eliminates the need to restart when connecting or disconnecting a SATA device to simplify your workflow.Each USB and eSATA port commands a dedicated PCIe lane, delivering a staggering total card-level throughput of up to 2,000MB/s with up to 500MB/s per port. Do more with your Mac Pro and connect 4 high-performance devices with just one spare PCIe port.Adds Faster Than Factory Interface To Mac Pros
![Pcie Pcie](https://ae01.alicdn.com/kf/HTB1NZJXOXXXXXXjXpXXq6xXFXXXn/High-Speed-4-Port-USB-3-0-PCIE-PCI-Express-Control-Card-Adapter-Front-Panel-for.jpg_640x640.jpg)
* up to 500MB/s total for x1 PCIe 2.0 slot or 250MB/s total for x1 PCIe 1.0 slot
** Dependent upon external enclosure compatibility
** Dependent upon external enclosure compatibility
- Adds two 6Gb/s eSATA ports for the fastest Mac Pro data interface available.
- Adds two USB 3.0 ports with Type A connectors (female).
- Works with ANY eSATA interfaced equipped external hard drive or optical drive.*
- Backward compatible with SATA Revision 1.x (1.5Gb/s) and 2.x (3Gb/s) drives.
- 20Gb/s transfer bandwidth.
- Up to 500MB/s data transfer rate per port**.
- Hot-Swap and Hot-Plug support.
- Optimized for all USB 3.0 & eSATA storage devices
- Plug and Play ready.
- Compatible with eSATA port equipped external storage solutions and optical drives.
- 3 Year NewerTech Product Limited Warranty Register Here
*Card does not support port multiplier cases/enclosures.
** up to 500MB/s total for x1 PCIe 2.0 slot or 250MB/s total for x1 PCIe 1.0 slot
** up to 500MB/s total for x1 PCIe 2.0 slot or 250MB/s total for x1 PCIe 1.0 slot
- Sleep not supported
Agency Approvals & Compliance
- FCC Rules, Part 15, Class B
- WEEE
- CE
- European Standard EN55022 (1998) Class B
- European Standard EN55024 (1998)
- RoHS Compliant
- 4.72' x 4.53' x 0.75' (12.0 x 11.5 x 1.9 cm)
Weight
- 0.43 lbs (0.19kg)
- 0°C ~ 70°C (32°F ~ 158°F)
Non-Operating Temperature
- -65°C~ 150°C (-85°F ~ 302°F)
- 0% ~ 80% non condensing
Warranty
- 3 Year NewerTech Product Limited Warranty
- Via USB 3.0: No
- Via eSATA: Yes
SuperSpeed USB 3.0
- Supports all USB communication speed data rate of Low-speed (1.5 Mbps) / Full-speed (12 Mbps) / High-speed (480 Mbps) / SuperSpeed (5Gbps)
- Supports all USB compliant data transfer type as follows; Control / Bulk / Interrupt
- NOT Compatible with USB 3.0 & USB 2.0 hubs
- Compliant with Serial ATA Specification 3.0
- Supports all SATA communication speed data rate of 6.0 Gb/s, 3.0 Gb/s, 1.5 Gb/s
- Supports Native Command Queuing (NCQ)
Hot Swappable
- Yes
- Yes
Thunderbolt™ Support
- Yes
- Intel-based Mac with available PCI Express 2.0 x4 lane slot
- Backwards compatible with PCI Express 1.0a at reduced speeds*
Form Factor
- Full-height, half-length
- Mac OS X 10.6 and later
Data Transfer Rate
- USB 3.0: up to 500MB/s per port
- eSATA: up to 500MB/s per port
- Up to 20Gb/s total card bandwidth.
Dedicated per port performance architecture fully utilizes the PCIe 2.0 x4 bandwidth
- Via USB 3.0: No
- Via eSATA: No
External Connectivity
- x2 USB 3.0 Type A ports
- x2 eSATA 6Gb/s ports
- none
Use of a PCIe 1.0 slot would reduce bandwidth to 1000MB/s (250MB/s per port).
Learn how to find your Mac's model ID or PC specs This product is compatible with...
Mac Pro
Model ID: MacPro1,1
Mac Pro (8-core)
Model ID: MacPro2,1
Mac Pro (Early 2008)
Model ID: MacPro3,1
Mac Pro (Early 2009 8-Core)
Model ID: MacPro4,1
Mac Pro (Early 2009 Quad-Core)
Model ID: MacPro4,1
Mac Pro 6-Core
(Mid 2010-2012)
(Mid 2010-2012)
Model ID: MacPro5,1
Mac Pro 8-Core
(Mid 2010-2012)
(Mid 2010-2012)
Model ID: MacPro5,1
Mac Pro 12-Core
(Mid 2010-2012)
(Mid 2010-2012)
Model ID: MacPro5,1
What iseSATA 6Gb/s?eSATA stands for External Serial Advanced Technology Attachment.eSATA 6Gb/s is the latest SATA standard to provide data transfer rates up to 6Gb/s (600 MB/s) for external storage devices.
- SATA 6Gb/s
- 600MB/s
- USB 3.0
- 500MB/s
- SATA 3Gb/s
- 300MB/s
- FireWire 800
- USB 2.0
- 60MB/s
We use cookies to provide you with a full shopping experience, including personalized content, and to help us improve your experience. To learn more, click here.
By continuing to use our site, you accept our use of Cookies, Privacy Policy.
Copyright 2006 – 2019 Newer Concepts Development Corporation, Site Index, Privacy PolicyBy continuing to use our site, you accept our use of Cookies, Privacy Policy.
Apple, Apple TV, FireWire, iBook, iMac, iPad, iPad Air, iPhone, iPod, iPod classic, iPod nano, iPod touch, Lightning, Mac, MacBook, MacBook Air, MacBook Pro, Mac mini,
macOS, Mac Pro, MagSafe, PowerBook, OS X, Retina, and Time Machine are trademarks of Apple Inc., registered in the U.S. and other countries. iPad mini is a trademark of Apple, Inc.
macOS, Mac Pro, MagSafe, PowerBook, OS X, Retina, and Time Machine are trademarks of Apple Inc., registered in the U.S. and other countries. iPad mini is a trademark of Apple, Inc.